Do you Know What the different of Each End Fittings of Turnbuckle

Categories:News
Author:
Origin:
Time of issue:2020-12-03
Views:0

(Summary description)Turnbuckles are used to take up slack and apply tension to a rigging assemblyThey are designed to be loaded in straight pull,inline applications.They come in a variety of types,sizes,and coatings to suit many suspending,tie down,and tensioning type applications.

Do you Know What the different of Each End Fittings of Turnbuckle





Do you Know What the different of Each End Fittings of Turnbuckle

Categories:News
Author:
Origin:
Time of issue:2020-12-03
Views:0

Information

Turnbuckles are used to take up slack and apply tension to a rigging assemblyThey are designed to be loaded in straight pull,inline applications.

They come in a variety of types,sizes,and coatings to suit many suspending,tie down,and tensioning type applications.

But do you know the Different of the end fittings between each type?Hope below information can give you some help

Hook End Fittings

Hook end fittings are used for temporary connections and are easily attached and detached from other rigging components.

We do not recommend hook fittings in situations where tension can unexpectedly release from the turnbuckle as this may cause the hook to dislodge.

Jaw End Fittings

Jaw end fittings are composed of a jaw,bolt,and nut.These are used to connect to other components that cannot be opened,such as an eyebolt or swaged sling eye.

Depending on size,some jaw turnbuckles only come with a pin and cotter.

Eye End Fittings

Eye end fittings are used with other components that can be opened and connect into the eye such as a shackle or quick link.

They contain no moving parts and are the most cost-effective end fitting of the three.

Cable Railing Swage Turnbuckles

Tianjin Founder also carries a variety of Cable Railing Swage Turnbuckles which are used in cable railing systems.Contact us for more information

Toggle Jaw

Toggle Jaw is a specialty end fitting which is available on some of our stainless-steel turnbuckles.

It is especially useful when the turnbuckle must articulate in a direction that isn’t allowed by the other component used in the application.

All of above turnbuckles are made of Stainless Steel 316/304

Advantage of stainless steel

1.Our most corrosion resistant.

2.Best suited for outdoor applications.

3.Highly resistant to rust.

4.Ideal for use in or near saltwater environments where corrosion frequently occurs.

5.The best choice when using other stainless steel components.

If you have any questions or need help choosing the products for your next rigging assembly,contact us.We look forward to helping you get your next project started.

Scan the QR code to read on your phone

Previous: How To Use Wire Rope Thimble？

Next: Rigging Hardware Inspection Tips （Shackle & Turnbuckle)

Previous: How To Use Wire Rope Thimble？

Next: Rigging Hardware Inspection Tips （Shackle & Turnbuckle)